Tutorial Week 10
Questions
Virtual Memory
Q1: What effect does increasing the page size have?
Q2: Why is demand paging generally more prevalent than pre-paging?
Q3: Describe four replacement policies and compare them.
Q4: Translate the following virtual addresses to Physical Addresses using the TLB. The system is a R3000. Indicate if the page is mapped, and if so if its read-only or read/write.
The EntryHi register currently contains 0x00000200.
The virtual addresses are 0x00028123, 0x0008a7eb, 0x0005cfff,0x0001c642, 0x0005b888, 0x00034000.
TLB | |
---|---|
EntryHi | EntryLo |
0x00028200 | 0x0063f400 |
0x00034200 | 0x001fc600 |
0x0005b200 | 0x002af200 |
0x0008a100 | 0x00145600 |
0x0005c100 | 0x006a8700 |
0x0001c200 | 0x00a97600 |
Q5: Describe programmed I/O and interrupt-driven I/O in the case of receiving input (e.g. from a serial port). Which technique normally leads to more efficient use of the CPU? Describe a scenario where the alternative technique is more efficient.
Q6: A device driver routine (e.g. read_block() from disk) is invoked by the file system code. The data for the filesystem is requested from the disk, but is not yet available. What do device drivers generally do in this scenario?
Q7: An example operating system runs its interrupt handlers on the kernel stack of the currently running application. What restriction does this place on the interrupt handler code? Why is the restriction required?